Orphrey Bands for Altar Frontal
Orphrey Bands for Altar Frontal:
Yes, it is true. The Ecclesiastical Sewing workroom is gone. There is nothing there at the moment except an empty room, with carpet badly soiled from construction dust and dirt. Gone are the cutting table and sewing table, the bookcase and the vintage books, the fabrics, and trims. It is an odd feeling to have what was an organized workroom completely disassembled.
There is a bit of construction going on, both upstairs and down, and it should wrap up in one more week! And then it will be exciting to reestablish the Ecclesiastical Sewing workroom in a brand new space! In the meantime, the dining table has become a sewing and cutting work table.
Some big events are looming shortly. The first and most important is Christmas. There is a new altar hanging set in the works but the construction mess and delays with the photo shoot, the project is being planned for Christmas 2016. Yes, that is right! Christmas 2016. As in retail, some church vestment projects will be in the works for a year ahead of time. I have several designs off at the moment being digitized for the 2016 Christmas season. As those new designs progress, I will be sure to let you know so you have plenty of time to plan ahead for next year’s Christmas celebrations.
The second big event is a family wedding over New Year’s weekend. And with any luck, the altar hangings (minus the embroidery designs) will be ready for the Wedding over New Year’s Weekend.
Here’s a sneak peek at one of the fabrics we’re using for the wedding altar frontal.
Enhancing with St. Hubert Fabric
The Orphrey bands for the altar frontal will be cut from St. Hubert Gold/Gold. St. Hubert is a brocatelle Ecclesiastical Fabric originally designed by Sir Ninian Comper and produced by M. Perkins and Sons circa 1890. The fabric will be available on our new website shortly after the first of the year in several colorways, including Red/Gold, White/Gold, Blue/Gold, Black/Gold, and Gold/Gold as in the above photo. St. Hubert is one of my favorite go-to ecclesiastical fabrics. It cuts up well for use in orphrey bands. The above orphrey bands are approximately 7″ wide before adding any trims. For an altar frontal, this can be a nice width for an orphrey band (depending on the altar size).
Design and Finishing Tips
St. Hubert has a linear design motif consisting of this floral motif surrounded by vines on either side. The piece is cut using the selvage as one edge, and finding the identical motif on the opposite side of the vine to use as a cutting line. Once the orphrey band is cut, the edges surge to provide a clean finish. Surging the edges of the orphrey bands can on occasion cause the fabric to bunch or pucker. Taking each piece and starting in the center, smooth the stitching, first to one end, and then to the opposite end until the fabric lies flat and smooth. Next, it is off to the ironing board to make sure the fabric is smooth and flat. When everything looks good as in the first photo above, it is time to stitch the gallon to the orphrey.
This is where things can become challenging, or things can go smooth as “silk.” When sewing the galloon trim to an orphrey band, it can be a challenge to keep both layers smooth and flat so they feed evenly through the sewing machine. Much comes from feel and experience. Using a walking foot or even a feed foot can help keep the layers of fabric and trim even.
Techniques and Considerations
I do not use pins, but others may find using pins is helpful. If you use pins, start at the center of each orphrey and pin to each end. Ease the trim to the fabric. Things will shift and move as you sew. It will be necessary to adjust as you go along. The trick is to keep the base fabric taunt and ease the galloon trim to the base fabric. Pulling the galloon trim taunt on the base fabric will result in puckers.
Still, others may find the use of a spray adhesive helpful. I prefer not to use adhesive sprays very often, and limit their applications. I have used things like the 1/4″ fusible web, and for me, it created a puckered mess.
The oak leaf galloon is a heavy metallic trim that is difficult to ease into a base fabric. Because of this stiffness which comes from the metallic fibers used to create the trim, it is not as susceptible to drawing up as are lighter weight galloons. Before launching into using the expensive ecclesiastical braids and trims, it might be worthwhile to purchase a variety of heavier ribbon trims from a local fabric store and practice with those on fabric scraps.
Just as was done on the small orphrey bands used for making stoles, I prefer to apply the galloon to either side of the orphrey to create a finished band. Then the finished band is applied to the final project.
Orphrey Bands for Altar Frontals and Chasubles
If done correctly, the end result should resemble the orphrey band above. The motif is perfectly centered, the galloon trim is applied smooth and straight, and the orphrey band is pucker-free. These same techniques would be employed when making orphrey bands for a chasuble as well. The difference between the bands for an altar frontal and a chasuble might be in the width of the orphrey. A “Y” orphrey might be slightly narrower, while a single column orphrey might be the same width, or slightly wider.
Now please, don’t expect perfection the first time you try applying gallon to long orphrey bands. Start with smaller orphrey bands like those used on stoles to get the feel of the process. Then slowly work your way to the larger projects. My first attempts at making orphrey bands for altar frontals were nothing short of a disaster. But with time and practice, they have improved.
Soli Deo Gloria
Orphrey Bands for Pastoral Stoles
Ecclesiastical Braids and Galloons: Finding the Right Trim
St. Hubert Liturgical Fabrics
Creating Orphrey Bands for Church Vestments
Sewing Galloon Trim to Orphrey Bands
Advent Vestment Projects in the Studio
St. Hubert
Red and Gold Liturgical Brocade Fabrics
How to Cut Orphrey Bands
George Frederick Bodley
Pastoral Stoles: How Much do They Cost?
Simple Details